What the safeties catch, not the headline load · review
VEVOR Power Cage SJ7100F review
VEVOR’s basic power cage: a reinforced 2 × 2 in frame rated 1,000 lb, 11 J-hook and 7 safety-bar levels, four band pegs, two plate holders and a bar storage hook, on a 17.7 sq ft footprint — the least expensive cage here.
1,000 lb total support, powder-coated carbon steel, 2 × 2 in reinforced frame
11 J-hook levels, 7 safety-bar levels
2 plate holders with clamps, 2 J-hooks, pull-up handle, 2 safety bars, 4 band pegs, bar storage hook
Footprint 17.7 sq ft
A correction
An earlier version of this page read 17.7 as cubic feet and called it a volume. The listing says square feet: it is the floor area the cage covers, about 1.64 m². That is a useful figure, and the page now uses it as one.
A cage at a stand’s price
Four posts, safety bars running through the frame and a pull-up handle, for about $160. That is less than several two-column stands. What the money does not buy is detail: fewer height levels than the Sunny racks, and no published hole size.
The two missing figures
Inside width and inside depth decide whether a bench fits between the uprights and whether there is room to walk out a squat. Neither is published. Amazon’s item data gives the outside — about 41 × 62 × 81 in.
What the listing leaves out
Inside dimensions, hole diameter and spacing, anchoring.
Figures are read from the Amazon.com listing on November 8, 2026. Price and stock change without notice.
Prices quoted in this text were read on November 8, 2026. The live price is at the top of the page.
The figures declared, and the gaps beside them
Strengths
Lowest price of the cages here, about $160
1,000 lb rating on a 2 × 2 in frame
Smallest stated footprint of the two VEVOR cages, 17.7 sq ft
Compromises
No inside width or depth published
Fewer J-hook and safety levels than most cages here
No hole diameter or anchoring guidance
Specifications
Overall height
80.7 in (205 cm) as Amazon lists the item
Footprint
17.7 sq ft (1.64 m²)
Upright section
2 × 2 in reinforced main frame, powder-coated carbon steel
Height positions
11 J-hook levels, 7 safety-bar levels
Hole diameter
Not published
Max total load
1,000 lb (454 kg)
Load basis
Total
Accessories
2 plate holders with clamps, 2 J-hooks, pull-up handle, 2 safety bars, 4 band pegs, bar storage hook
Anchoring
Not stated
Amazon reference
B0G9K5KB79 (Amazon.com)
EAN
0197988178040
What buyers ask about this one
What is 17.7 sq ft?
The floor area the cage covers, in square feet — about 1.64 m². It is the listing’s footprint figure, not a volume.
Will a bench fit inside?
The inside width and depth are not published, so it cannot be confirmed from the listing. Amazon’s item data gives an outside size of about 41 × 62 × 81 in.
Cage or stand?
A cage: four posts with safety bars through the frame and a pull-up handle overhead.
Our score
7.4/ 10
The cheapest way into a four-post cage on this shelf, and a plain one: 1,000 lb, a 2 × 2 in frame, safety bars and a pull-up handle. Its footprint is 17.7 sq ft — an area, not a volume, as an earlier version of this page misread it. What it leaves out is the inside width and depth, which decide whether a bench fits.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $160 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 8, 2026.
Who this one is for, among strength training equipment
A room with the ceiling for a cage and a bench that has to go inside it
Sources
Specifications: the manufacturer sheet for home gym equipment and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
A full-size power cage on a 14-gauge steel frame with a 2,130 lb combined capacity, 18 numbered levels for J-hooks and spotter arms, a reversible pull-up bar with a 32 mm grip and six band pegs — sold by Amazon itself.
Best for: A shared home gym where several people reset the J-hooks and spotters between sets
Full-size rack, 300 lb each on pull-up bar, J-hooks and spotter arms, 100 lb per plate holder, 18 J-hook positions
A full-size power rack that rates each zone separately — 300 lb on the pull-up bar, 300 lb on the J-hooks, 300 lb on the spotter arms and 100 lb per plate holder — with 18 J-hook positions and an 8-position angled pull-up bar.
Best for: Lifters who want to know what the spotter arms are rated to before trusting them
1,600 lb, 2 mm carbon steel, 48.9 × 43.3 × 83.3 in, dual independent pulleys, 13 attachments
A power cage with two independent cable pulleys, a 1,600 lb tested capacity, 2 mm carbon steel tubing, 16 height positions and published outside dimensions of 48.9 × 43.3 × 83.3 in on a 14.7 sq ft footprint.
Best for: Two people training at once in a garage, one in the rack and one on the cables