Uprights, hole spacing, and what catches the bar · review
The only stand in this family that publishes its steel section: a 50 mm heavy-load tube frame, with a height range of 106 to 170 cm and a published width of 59 cm.
The bottom line The only stand here that says what it is made of. A published 50 mm upright section is the figure every future attachment has to match, and it turns "robust steel" into something checkable. The figure it withholds — hole diameter, hole spacing in centimetres — means the attachment question is opened rather than answered, and the 15-step count is given without a full breakdown.
Fifty millimetres. It is the first figure in the three-part check every rack attachment needs — section, hole diameter, hole spacing — and no other listing in this family gives it.
It is also what turns a description into a comparison. Every stand here says robust or heavy-duty; this one says 50 mm.
The other two. Without a hole diameter a pin cannot be matched, and without a hole spacing in centimetres the step between positions is unknown.
So the 50 mm opens the attachment question rather than answering it, and this page says so rather than treating one figure out of three as a fit.
Fifteen in total, six for the barbell rest. The remaining nine are not attributed in the listing.
This site reports what is published. Nine steps belonging to something the maker did not name is what is known, and it is recorded as that.
A central axis with a double triangular steel frame, double T feet, non-slip tips. All of it is construction description rather than measurement, and it is carried here as the maker’s own words.
From 78 € to 96 € across the German, French, Italian and Spanish Amazon stores, on the one reading this page rests on.
The American and British Amazon catalogues list the reference with nobody selling behind it.
These figures are what Keepa returned on the day this page was last written. Stock and prices move without notice.
Prices quoted in this text were read on 20 September 2026. The live price is at the top of the page.
| Overall height | 106 to 170 cm, adjustable |
|---|---|
| Inside width | Not applicable — two separate stands; published width 59 cm |
| Inside depth | Not applicable — two separate stands |
| Upright section | 50 mm heavy-load steel tube |
| Hole spacing | 15 steps in total, of which 6 are for the barbell rest |
| Hole diameter | Not published by the maker |
| Max total load | 200 kg, as the maker states it |
| Anchoring | Free-standing; double T feet with non-slip rubber tips, no fixing pattern published |
| Amazon reference | B07F63NLYG (one reference across 6 Amazon marketplaces) |
| EAN | 3760287790052 |
Because it is the first of the three figures every rack attachment has to match, and no other listing in this family publishes it. It is also a statement about stiffness that "robust steel" is not — a section is a measurement and an adjective is not.
No. Section, hole diameter and hole spacing all have to match, and only the section is published. It is one of three checks rather than the whole of it.
The maker gives 15 adjustment steps in total and attributes 6 of them to the barbell rest, without saying where the rest belong. The page reports both figures as published and records that the breakdown is incomplete.
Somebody who wants to know what steel the stand is made of
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 20, 2026.
Specifications: manufacturer sheet and Amazon product page. Prices and availability: Keepa. No product on this site has been physically tested.
94–153 × 43 × 39 cm, 7 steps of 10 cm, 16 kg
A squat stand that publishes a complete dimension block and the size of its adjustment step: seven positions, ten centimetres apart. The step is the figure that decides whether a suitable height exists.
Best for: A low ceiling where 153 cm is the maximum height available
Rests to 400 kg, safeties to 500 kg
Two separate stands with the highest published figures in this family — 400 kg on the upper rests and 500 kg on the lower safeties — and two different adjustment schemes depending on the variant.
Best for: A room where the stands have to be moved aside between sessions
Rests 98–156 cm in 13 steps, safeties 64–83 cm
A stand that publishes two separate adjustment ranges — thirteen steps for the bar rests and five for the safeties — plus an adjustable distance between the two columns.
Best for: A bench press setup where the rest height has to land precisely
