A sled angle, a plate post, and a safety catch you will use · review
A three-station tower — high pulley, double chest station and leg press — on a 45 kg stack, with the full footprint and a user rating both published.
The bottom line The only machine on this shelf that publishes where it stands and who can stand on it: 160 × 108 × 200 cm and 120 kg, both given. Three stations from one 45 kg stack, shrouded in steel. That stack is the limit — it is the lowest resistance in this family, on the exercise that can take the most.
This is the only listing in this family that publishes either, and it publishes both.
A hundred and sixty by a hundred and eight is the floor it occupies. Two metres is the height it needs. A hundred and twenty kilograms is the user it takes.
The dedicated leg press in this family publishes a load rating and no footprint; the other tower publishes neither.
The resistance, and the honest limit of this machine.
The legs are the body’s strongest muscle group. The dedicated machine on this shelf is rated for 249 kg of plates and the other tower here reaches 67 kg.
What a given person needs is not a published figure and this site does not state one. What is published is that this is the lowest of the three, and that a stack cannot be added to the way plates can.
Steel, enclosing the stack.
An open stack leaves a travelling gap as the plates move. In a shared room — which is the room a three-station tower is usually bought for — that is worth having, and the maker names it rather than leaving the stack undescribed.
High pulley, chest, leg press.
The leg press is a station here, not the machine. It is reached by reconfiguring, and the upside is two other exercises from the same floor space.
How many adjustment positions the stations have. The dedicated machine in this family publishes nine; this listing publishes none.
From 390 € to 515 € across the German, French and Spanish Amazon stores, on the one reading this page rests on.
The American, British and Italian Amazon catalogues list the reference with nobody selling behind it.
These figures are what Keepa returned on the day this page was last written. Stock and prices move without notice.
Prices quoted in this text were read on 20 September 2026. The live price is at the top of the page.
| Resistance | A 45 kg weight stack, enclosed in a steel shroud |
|---|---|
| Adjustment | Pin-selected on the stack; no position count published |
| Frame | Thick steel, with non-slip grip sleeves and foot pads; assembly required |
| Footprint | 160 L × 108 W × 200 H cm |
| Max user weight | 120 kg |
| Amazon reference | B0DK8VRXBD (one reference across 6 Amazon marketplaces) |
| EAN | 4255633583222 |
It is the lowest resistance in this family, and the legs are the body’s strongest muscle group — the dedicated machine here is rated to 249 kg of plates. Whether 45 kg is enough depends entirely on the user, which is not a figure any listing publishes and not one this site states.
Because a tower with a high pulley has to stand clear under the ceiling, and a standing user pulls from above that. Two metres plus a floor covering plus the user reaching up is more than some rooms have. It is published, which is the point.
It encloses the moving plates in steel. An open stack has a gap that travels as the weight moves, and in a shared room that is a thing to be aware of. The maker names the shroud specifically.
A first tower where the leg press is one reason among three
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom, United States. Listed is not the same as in stock — availability changes daily.
Details checked on September 20, 2026.
Specifications: manufacturer sheet and Amazon product page. Prices and availability: Keepa. No product on this site has been physically tested.
67 kg pin-selected stack, leg rollers, weight guard supplied
A multi-station tower with a 67 kg pin-selected stack — the highest here — and a supplied guard over the weights, but no footprint and no user rating.
Best for: The widest exercise list from one frame, with the most stack behind it
Plate-loaded, 1 in and 2 in posts, 249.48 kg, 2 mm carbon steel
The only dedicated leg press here: plate-loaded on interchangeable 1-inch and 2-inch posts, rated to 249.48 kg, on 2 mm carbon-steel tube.
Best for: Loading the legs past what any stack on this shelf reaches
400 mm connector, 15 mm foam padding
A two-in-one set sold across a 15 to 40 kg range, with a published 400 mm connecting tube and a stated 15 mm of foam padding on it. The contents list is complete; the plate breakdown is not.
Best for: Somebody buying the two-in-one arrangement rather than a specific plate list
